Tlemcen Car electronics - Afficher un message - BSI - EEPROM 95160 replace/switch for C3, 2002, 1.4petrolKFV

johnnybeast · 31/07/2014, 02h58

Hi Runsun, the only way to get it back up and running now it to flash a 'virgin' BSI file to the 95160 EEPROM the re-configure with PP2000 or Lexia.

You will need the security code tho, you can get that from the ECU, which is stored on a small EEPROM in there. You'll need to read it and pop the file into ImmoTool or similar program and get the code from that.

31/07/2014, 02h58	#7
johnnybeast Membre Non Confirmé Date d'inscription: juillet 2014 Localisation: Dudley, UK Messages: 7 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	Hi Runsun, the only way to get it back up and running now it to flash a 'virgin' BSI file to the 95160 EEPROM the re-configure with PP2000 or Lexia. You will need the security code tho, you can get that from the ECU, which is stored on a small EEPROM in there. You'll need to read it and pop the file into ImmoTool or similar program and get the code from that.