Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Categorie principale > Tutoriels

Tutoriels Tutoriels pour vous aider.

autotool
Réponse
 
Outils de la discussion
Vieux 18/02/2018, 15h39   #1
tico
Membre accro
 
Avatar de tico
 
Date d'inscription: janvier 2013
Localisation: france,réunion
Messages: 1 266
Thanks: 1 378
Thanked 1 172 Times in 623 Posts
Pouvoir de réputation: 26
tico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud of
Par défaut TUTO création d'un câble pour RET sur table

Bonjour le amis ce petit "tuto" pour les possesseurs du Renault ecu tools et surtout du câble obd2 de chez ECUVONIX qui ne comporte pas de L-line...
pour la lecture sur table des écus renault...

mot de passe : tlemcen-electronic

http://dl.free.fr/mv54coO7W

---------- Post added at 15h39 ---------- Previous post was at 15h36 ----------

utilisateur = admin
mot de passe = tlemcen-electronic
tico est déconnecté   Réponse avec citation
The Following 33 Users Say Thank You to tico For This Useful Post:
abdel (18/02/2018), akai77 (24/02/2018), arnaud_dejard (06/11/2018), atlon2 (18/02/2018), autodiagauto (02/06/2018), azzouz (28/05/2018), bzkmatrix (09/05/2018), chaoui05 (18/02/2018), chipshop (24/05/2018), DIAGSYSTEM25 (05/06/2019), douls60 (25/06/2018), fedge (18/02/2018), gary01 (05/06/2019), jah83 (18/02/2018), jardini (04/11/2021), kdo75 (30/05/2018), kilm (19/02/2018), klif26 (18/02/2018), MECASOLUTION (18/02/2018), miloud_slt2014 (23/06/2018), moby (06/08/2018), nasisamy (27/05/2019), nounour10 (07/01/2019), oran13 (18/02/2018), pouettedu76 (18/02/2018), ptidave001 (24/06/2018), rapou30 (04/02/2019), revo (01/03/2018), tony60 (05/06/2019), VISVAL (01/04/2018), waffer (03/08/2018), Y.B tec (21/05/2018), yvespapou (18/02/2018)
Vieux 05/06/2019, 15h58   #2
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Salut,

Le lien ne fonctionne plus ( en meme temps j’arrive 1 ans trop tard) est ce que qulequ’un a encore le tuto?


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 16h10   #3
tico
Membre accro
 
Avatar de tico
 
Date d'inscription: janvier 2013
Localisation: france,réunion
Messages: 1 266
Thanks: 1 378
Thanked 1 172 Times in 623 Posts
Pouvoir de réputation: 26
tico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud of
Par défaut

Salut tu as le cable de chez ecuvonix ?
tico est déconnecté   Réponse avec citation
The Following User Says Thank You to tico For This Useful Post:
gary01 (05/06/2019)
Vieux 05/06/2019, 16h15   #4
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Nan mais si c’est interessant je peux le commander


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 16h31   #5
tico
Membre accro
 
Avatar de tico
 
Date d'inscription: janvier 2013
Localisation: france,réunion
Messages: 1 266
Thanks: 1 378
Thanked 1 172 Times in 623 Posts
Pouvoir de réputation: 26
tico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud oftico has much to be proud of
Par défaut

Il faut juste dévier la voie 15 pour obd
tico est déconnecté   Réponse avec citation
The Following User Says Thank You to tico For This Useful Post:
gary01 (05/06/2019)
Vieux 05/06/2019, 17h08   #6
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Et est ce que tu aurais encore lz lien du cable stp?je comptait le fait moi meme mais ca m’arrangerais de le trouver tout fait


Envoyé de mon iPhone en utilisant Tapatalk

---------- Post added at 15h06 ---------- Previous post was at 15h04 ----------

Est ce que c’est celui ci

http://www.ecuvonix.com/obdii-pinout...ml?language=en


Envoyé de mon iPhone en utilisant Tapatalk

---------- Post added at 15h08 ---------- Previous post was at 15h06 ----------

Parce que j’avais vu celui ci sinon

https://premium-tools24.com/Multi_Pu...or-IO-Terminal


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 17h14   #7
progdebutant
Genious T-E
 
Avatar de progdebutant
 
Date d'inscription: mai 2016
Localisation: france
Messages: 3 937
Thanks: 4 537
Thanked 3 324 Times in 1 960 Posts
Pouvoir de réputation: 46
progdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond reputeprogdebutant has a reputation beyond repute
Par défaut

salut l'ami

http://www.ecuvonix.com/obdii-pinout...ot-p-1430.html

apparement ils ont fais une mise à jour et le cable a le kline maintenant

ou sinon en plus cher mais moins cheap ? et avec + de fils

c'est celui que j'ai

https://chiptuningshop.com/product/u...-pinout-cable/
progdebutant est déconnecté   Réponse avec citation
The Following User Says Thank You to progdebutant For This Useful Post:
gary01 (05/06/2019)
Vieux 05/06/2019, 19h48   #8
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Salut l’ami,

Effectivement bien plus cher mais il a l’air vraiment pas mal


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 20h29   #9
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

T’as souvent eu besoin d’utiliser la resistance de 120ohm pour lire un ecu sur table?


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 23h20   #10
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Citation:
Envoyé par progdebutant Voir le message
salut l'ami

http://www.ecuvonix.com/obdii-pinout...ot-p-1430.html

apparement ils ont fais une mise à jour et le cable a le kline maintenant

ou sinon en plus cher mais moins cheap ? et avec + de fils

c'est celui que j'ai

https://chiptuningshop.com/product/u...-pinout-cable/


Dit moi les transistor et le commutateur 120/60 ohms ca sert a quoi?


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Vieux 05/06/2019, 23h22   #11
fils
Genious T-E
 
Avatar de fils
 
Date d'inscription: décembre 2011
Localisation: Paris, Ile de france
Messages: 4 125
Thanks: 2 509
Thanked 6 625 Times in 3 109 Posts
Pouvoir de réputation: 83
fils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond reputefils has a reputation beyond repute
Par défaut

Bonjour,

Pour simuler le résistance de terminaison du CAN sur table...
fils est déconnecté   Réponse avec citation
The Following User Says Thank You to fils For This Useful Post:
gary01 (05/06/2019)
Vieux 05/06/2019, 23h28   #12
gary01
Patron de Garage
 
Avatar de gary01
 
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 35
Messages: 5 436
Thanks: 5 086
Thanked 8 762 Times in 3 992 Posts
Pouvoir de réputation: 98
gary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond reputegary01 has a reputation beyond repute
Par défaut

Salut,

Merci pour ta reponse.

Et ca sert souvent pour la lecture sur table?
Sur tout les cable que j’avais vu jusqu’a maintenant c’etait pas present


Envoyé de mon iPhone en utilisant Tapatalk
gary01 est déconnecté   Réponse avec citation
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
Tuto cable additionnel multimedia pour renolink Nico66 Renault clip, DDT2000, Nissan consult 6 23/04/2019 13h22
"tuto" creation support de cle transpondeur carprog tico Tutoriels 2 22/06/2017 19h12
Tuto bsi sur table avec fvdi raed83300 Tutoriels 5 19/12/2016 22h04
Tuto installation cable commande de vitesse golf 4 junk Tutoriels 14 11/10/2015 03h13


Fuseau horaire GMT +1. Il est actuellement 09h00.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved