Circuit anti lag turbo Subaru competition explication Video

OVERSPEED · 01/08/2023, 05h21

Bonjour

Le circuit anti lag pour les turbos des Subaru rallye explique en Video

https://www.youtube.com/watch?v=aLGNlGCPlFw

Interessant

Au revoir
OS

progreurLvl1 · 01/08/2023, 07h04

Salut, super intéressant merci !

Commentaire du dessinateur du brevet de la techno anti lag présenté dans la vidéo
"
I just stumbled across this video, and was extremely pleased to see you cover a system I worked on during my SWRT days. I was the designer on this system, that was invented, developed brought to competition by Roland Broadbent. All the drawings from the patent you used were done by me. Some additional points:
1. No ignition system was used because the rules didn’t allow for a secondary ignition source after the engine spark plugs.
2. The idea came from a diesel French tank in the 1960’s that had what’s called a hyper charger, but that had its own ignition system.
3. Combustion in the chamber was initiated by the plate on the end of probe in the centre of the chamber, that flowed cherry red due to the hot exhaust gases coming from the engine. This plate restricted flow and reduced the top power of the engine. This later evolved to annular ring that was less restrictive to the flow through the chamber.
4. The boost tank used by Ford was illegal, but passed scrutineering when discovered. SWRT went the next rally with a bear barrel doing the same job. After that boost chambers on all cars were outlawed.
5. Different ALS systems were used on customer WRC cars.
6. A road car version was developed for STi by Prodrive, but never went to production due to cost and long term durability.
"

Dane01000 · 04/09/2023, 19h36

Eh ben, je ne m'était jamais posé autant de questions !!!

01/08/2023, 05h21	#1
OVERSPEED Genious T-E Date d'inscription: septembre 2020 Localisation: Dijon France Âge: 58 Messages: 3 297 Thanks: 870 Thanked 7 659 Times in 2 735 Posts Pouvoir de réputation: 84	Circuit anti lag turbo Subaru competition explication Video Bonjour Le circuit anti lag pour les turbos des Subaru rallye explique en Video https://www.youtube.com/watch?v=aLGNlGCPlFw Interessant Au revoir OS

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
Video reparation pistes PCB / circuit	OVERSPEED	Tutoriels	0	07/04/2021 14h00
Master II2.2DCI 90CV problème huile dans circuit du turbo	carto	Automobile en général	6	28/09/2018 12h25
VIDEO GARRETT Turbo Installation	star31	Mécanique générale	0	09/04/2014 06h27
video d'explication fap	prodlt	Tutoriels	0	24/12/2013 23h54

01/08/2023, 07h04	#2
progreurLvl1 Débutant T-E Date d'inscription: septembre 2022 Localisation: France, Paris Messages: 92 Thanks: 119 Thanked 63 Times in 35 Posts Pouvoir de réputation: 2	Salut, super intéressant merci ! Commentaire du dessinateur du brevet de la techno anti lag présenté dans la vidéo " I just stumbled across this video, and was extremely pleased to see you cover a system I worked on during my SWRT days. I was the designer on this system, that was invented, developed brought to competition by Roland Broadbent. All the drawings from the patent you used were done by me. Some additional points: 1. No ignition system was used because the rules didn’t allow for a secondary ignition source after the engine spark plugs. 2. The idea came from a diesel French tank in the 1960’s that had what’s called a hyper charger, but that had its own ignition system. 3. Combustion in the chamber was initiated by the plate on the end of probe in the centre of the chamber, that flowed cherry red due to the hot exhaust gases coming from the engine. This plate restricted flow and reduced the top power of the engine. This later evolved to annular ring that was less restrictive to the flow through the chamber. 4. The boost tank used by Ford was illegal, but passed scrutineering when discovered. SWRT went the next rally with a bear barrel doing the same job. After that boost chambers on all cars were outlawed. 5. Different ALS systems were used on customer WRC cars. 6. A road car version was developed for STi by Prodrive, but never went to production due to cost and long term durability. "

04/09/2023, 19h36	#3
Dane01000 Membre habitué T-E Date d'inscription: octobre 2021 Localisation: FRANCE, Beaupont Âge: 45 Messages: 140 Thanks: 278 Thanked 98 Times in 50 Posts Pouvoir de réputation: 3	Eh ben, je ne m'était jamais posé autant de questions !!!