20/03/2019, 14h55 | #1 |
Débutant
Date d'inscription: février 2019
Localisation: Ukraine
Âge: 51
Messages: 23
Thanks: 5
Thanked 5 Times in 2 Posts
Pouvoir de réputation: 0 |
citroen
Hello, you need to disable the immobilizer on Citroen, can someone help?
ecu bosch edc17c10 Dernière modification par Volik8 ; 20/03/2019 à 17h07. |
20/03/2019, 15h00 | #2 |
Membre trés attaché
Date d'inscription: janvier 2013
Localisation: Algérie, alger
Messages: 804
Thanks: 193
Thanked 573 Times in 276 Posts
Pouvoir de réputation: 21 |
Hi post your file you can help
|
20/03/2019, 17h08 | #3 |
Débutant
Date d'inscription: février 2019
Localisation: Ukraine
Âge: 51
Messages: 23
Thanks: 5
Thanked 5 Times in 2 Posts
Pouvoir de réputation: 0 |
Help guys please !!!
|
21/03/2019, 10h04 | #4 |
Débutant
Date d'inscription: février 2019
Localisation: Ukraine
Âge: 51
Messages: 23
Thanks: 5
Thanked 5 Times in 2 Posts
Pouvoir de réputation: 0 |
Hello !! Can someone help
|
21/03/2019, 12h54 | #5 |
Genious T-E
Date d'inscription: septembre 2016
Localisation: Bretagne
Âge: 53
Messages: 4 681
Thanks: 2 394
Thanked 5 438 Times in 3 048 Posts
Pouvoir de réputation: 66 |
like that and go back
forget not thank you paas ,mp |
The Following User Says Thank You to yann3 For This Useful Post: | Volik8 (21/03/2019) |
21/03/2019, 16h38 | #6 |
Membre habitué T-E
Date d'inscription: mai 2015
Localisation: Madagascar/Majunga
Messages: 117
Thanks: 86
Thanked 32 Times in 26 Posts
Pouvoir de réputation: 9 |
Please post Résulta Volik8
|
22/03/2019, 11h31 | #7 |
Débutant
Date d'inscription: février 2019
Localisation: Ukraine
Âge: 51
Messages: 23
Thanks: 5
Thanked 5 Times in 2 Posts
Pouvoir de réputation: 0 |
Hello colleagues, the car started but there is a problem, the bsi unit does not understand that the car is running, and the wipers do not have anything working ...
there is an error in the bsi block by immobilizer, please correct the dump bsi |
22/03/2019, 12h01 | #8 |
Genious T-E
Date d'inscription: septembre 2016
Localisation: Bretagne
Âge: 53
Messages: 4 681
Thanks: 2 394
Thanked 5 438 Times in 3 048 Posts
Pouvoir de réputation: 66 |
Hi, I do not see the relationship between ecu engine and bsi
when making an ecu immobilizer, do not touch the bsi. the problem is probably |
22/03/2019, 13h31 | #9 |
Membre attaché
Date d'inscription: septembre 2013
Localisation: France, Paris
Messages: 226
Thanks: 106
Thanked 101 Times in 57 Posts
Pouvoir de réputation: 12 |
Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.
|
23/03/2019, 08h40 | #10 |
Genious T-E
Date d'inscription: septembre 2016
Localisation: Bretagne
Âge: 53
Messages: 4 681
Thanks: 2 394
Thanked 5 438 Times in 3 048 Posts
Pouvoir de réputation: 66 |
Hi
the car did not start after a worry bsi, probably.immo off put the engine back into operation, but can not do anything for the bsi. you have to change the bsi and you swap eeprom salut la voiture ne demarrait pas suite a un soucis bsi,probablement.l´immo off a remis le moteur en fonctionnement ,mais ne peut rien pour le bsi. il faut que tu change le bsi et tu swap l´eeprom |
28/03/2019, 15h32 | #11 | |
Débutant
Date d'inscription: février 2019
Localisation: Ukraine
Âge: 51
Messages: 23
Thanks: 5
Thanked 5 Times in 2 Posts
Pouvoir de réputation: 0 |
Citation:
Replaced BSI The problem remained !!! BSI does not see the engine running, BSI remains in economy mode. Electric power steering also does not work. The battery charging light is on when the engine is running. Errors in the engine control unit U1401 U1218 U1213 What to do??? |
|
29/03/2019, 07h53 | #12 |
Genious T-E
Date d'inscription: septembre 2016
Localisation: Bretagne
Âge: 53
Messages: 4 681
Thanks: 2 394
Thanked 5 438 Times in 3 048 Posts
Pouvoir de réputation: 66 |
Hi
control the bus can h and ldu abs box, surely him that prevents communication between bsi, engine ECU and power steering. so shunt the can h and l of the abs case ---------- Post added at 08h53 ---------- Previous post was at 08h52 ---------- Hi control bus can h and l of the abs box, surely it prevents communication between bsi, engine ECU and power steering. so shunt the can h and l of the abs case |
29/03/2019, 11h53 | #13 |
Genious T-E
Date d'inscription: septembre 2016
Localisation: Bretagne
Âge: 53
Messages: 4 681
Thanks: 2 394
Thanked 5 438 Times in 3 048 Posts
Pouvoir de réputation: 66 |
as said ggvaniou, you will need the eeprom too
https://www.tlemcen-electronic.com/f...ad.php?t=81606 |
30/03/2019, 11h03 | #14 |
Membre trés attaché
Date d'inscription: novembre 2015
Localisation: france leves
Messages: 928
Thanks: 500
Thanked 396 Times in 188 Posts
Pouvoir de réputation: 16 |
Hello test
|
Sponsored Link |
Liens sociaux |
|
|
Discussions similaires | ||||
Discussion | Auteur | Forum | Réponses | Dernier message |
pin bsi jc citroen | brahim chafa3 | Transponder, code pin | 1 | 31/03/2018 22h21 |
Citroen dumps immo off tested for citroen 100/100 ok | lassad | Immobilizer dumps/solutions | 0 | 14/01/2016 14h18 |
citroen c3 1.1 | autodiagnos kamal | Transponder, code pin | 2 | 22/03/2013 21h10 |
Citroen Lexia 347.19 + Citroen C5 2001-2008 Multilingual | TAGRART | LEXIA, PP2000, DiagBox | 0 | 16/11/2012 16h48 |
citroen c2 | thepatrick31 | Airbag | 1 | 11/04/2010 18h38 |