Renault CAN Clip v220 et patch

[33300]

Patch rtl clone Board
c:\CLIP\Config\
probesConfiguration.xml

<?xml version="1.0" encoding="utf-8"?>
<!-- Keywords PVCS : Begin -->
<!--?DoC_Info Revision="$Revision:   1.8  $" Author="$Author:   acarref  $" Date="$Date:   Dec 13 2005 18:58:24" ?-->
<!-- Keywords PVCS : end -->
<Conf_Root>
	<Conf_Set name="Borneo">
		<Conf_Set name="Acquisition" doc="Acquisition layer configuration, see NT021027.001">
			<Conf_Param name="DriverPath" value="../Drivers"/>
			<Conf_Param name="DriverIniPath" value="../../../CLIP/Data/Appli/Params/"/>
			<Conf_Param name="FirmwarePath" value="../../../CLIP/Data/Appli/Params/"/>
			<Conf_Param name="ProbesInfoPath" value="../../../CLIP/Data/User/probesInformation.xml"/>
			<Conf_Set name="Boards">
				<!-- BoardNis04VI -->
				<Conf_Set name="BoardNis04VI">
					<Conf_Param name="DriverFile" value="Nis04_VI_DrvUsr.dll"/>
					<Conf_Param name="DriverIniFile" value="VIDrvUsr.ini"/>
					<Conf_Param name="AppliFirmwareFile" value="NISVI04_firmware.s28"/>
					<Conf_Param name="BootFirmwareFile" value="BOOTNISVI04.s28"/>
					<Conf_Param name="BTFirmwareFile" value="UnspecifiedAsFirmwaresAreNeverUpdated.dfx"/>
					<Conf_Param name="Adapter" value="borneo:/AcqBoardNis04VIAdapter"/>
					<Conf_Param name="ProtocolesServicesFile" value="../../Data/Appli/Params/AcqProtocolServices.xml"/>
					<Conf_Param name="EnumTimeout" value="180" dmtype="int"/>
					<!--Conf_Param name="PortKwpProtocolName" value="PR2003_0.AP" dmtype="string"/-->
					<!-- uncomment this line to executre PR2003_0 in native mode -->
					<Conf_Param name="PortKwpProtocolName" value="PR2000_R.AP"/>
					<Conf_Param name="PortDdl1ProtocolName" value="PRDDL1V2.AP"/>
					<Conf_Param name="EnumPriority" value="1" dmtype="int"/>
				</Conf_Set>
				<!-- Board16 -->
				<Conf_Set name="Board16">
					<Conf_Param name="DriverFile" value="JcaeCan.dll"/>
					<Conf_Param name="DriverIniFile" value="JCAECanIso.ini"/>
					<Conf_Param name="FirmwareFile" value="Applican.s19"/>
					<Conf_Param name="Adapter" value="borneo:/AcqBoard16Adapter"/>
					<Conf_Param name="BusyRetry" value="60"/>
					<Conf_Param name="EnumPriority" value="2" dmtype="int"/>
				</Conf_Set>
				<!-- Board17 -->
				<Conf_Set name="Board17">
					<Conf_Param name="DriverFile" value="JcaeIso.dll"/>
					<Conf_Param name="DriverIniFile" value="JCAECanIso.ini"/>
					<Conf_Param name="FirmwareFile" value="Appliiso.s19"/>
					<Conf_Param name="Adapter" value="borneo:/AcqBoard17Adapter"/>
					<Conf_Param name="ProtocolesServicesFile" value="../../Data/Appli/Params/AcqProtocolServices.xml"/>
					<Conf_Param name="EnumPriority" value="2" dmtype="int"/>
				</Conf_Set>
				<!-- BoardJ2534 -->
				<Conf_Set name="BoardJ2534">
					<Conf_Param name="Adapter" value="borneo:/AcqBoardJ2534Adapter"/>
					<Conf_Param name="ProtocolesServicesFile" value="../../Data/Appli/Params/AcqProtocolServices.xml"/>
					<Conf_Param name="APIVersion" value="04.04"/>
					<Conf_Param name="EnumPriority" value="3" dmtype="int"/>
				</Conf_Set>
			</Conf_Set>
			<!--  Tm089755 Firwmare update: only X91 performs it (it is overriden in that application's config file) -->
			<Conf_Param name="FwUpdateBehavior" dmtype="int" value="4" type="integer" min="1" max="4" doc="{UpdateAlways=1;UpdateIfDifferent=2;UpdateIfLower=3;UpdateNever=4}. UpdateIfLower recommanded."/>
			<!-- Acq internals, insignificant impact if changed -->
			<Conf_Param name="ReadingLoopDelay" value="50" doc="the thread reading messages from the driver wakes up every 'ReadingLoopDelay' to ensure application does not want to exit"/>
			<Conf_Param name="OverloadWarningLevel" value="200" doc="a warning message is logged if the ECU answer buffer contains more than 'OverloadWarningLevel' messages"/>
		</Conf_Set>
		<!-- Acquisition -->
	</Conf_Set>
</Conf_Root>

probesConfiguration.logs

<?xml version="1.0" encoding="UTF-8"?>
<!-- Keywords PVCS : Begin -->
<!--?DoC_Info Revision="$Revision:   1.8  $" Author="$Author:   acarref  $" Date="$Date:   Dec 13 2005 18:58:24" ?-->
<!-- Keywords PVCS : end -->
<Conf_Root>
	<Conf_Set name="Borneo">
		<Conf_Set name="Acquisition" doc="Acquisition layer configuration, see NT021027.001">
			<Conf_Set name="Boards">
				<Conf_Set name="Board16">
					<Conf_Param name="DriverFile" value="JcaeCan_avec_log.dll"/>
					<Conf_Param name="DriverIniFile" value="JCAECanIso_logs.ini"/>
				</Conf_Set>
				<!-- Board16 -->
				<Conf_Set name="Board17">
					<Conf_Param name="DriverFile" value="JcaeIso_avec_log.dll"/>
					<Conf_Param name="DriverIniFile" value="JCAECanIso_logs.ini"/>
				</Conf_Set>
				<!-- Board17 -->
				<Conf_Set name="BoardNis04VI">
					<Conf_Param name="DriverFile" value="Nis04_VI_DrvUsr_avec_log.dll"/>
					<Conf_Param name="DriverIniFile" value="VIDrvUsr_logs.ini"/>
				</Conf_Set>
				<Conf_Set name="BoardJ2534">
					<!-- no provisions for logs exist in current version, maybe it will have to be added here in the future -->
				</Conf_Set>
			</Conf_Set>
		</Conf_Set>
		<!-- Acquisition -->
	</Conf_Set>
</Conf_Root>

[madinina84]

Envoyé par mohaalba

bonjour
je vous partage Renault CAN Clip v220 et le patch par "julie.long"

Lien en fichier joint

n'oubliez pas like merci svp





*

MERCI POUR LE PARTAGE

[Maimeun]

Bonjour, j'ai récupérer le v220 mais je n'arrive pas a le faire fonctionné avec mon ancienne sonde rtl2002. Pourtant j'ai bien patch rtl clone board 16.17.
Quelqu'un a t'il les 2 patch fonctionnels svp

Envoyé de mon SM-G965F en utilisant Tapatalk

[Maimeun]

Bonjour personne pour m'aider [emoji17]

Envoyé de mon SM-G965F en utilisant Tapatalk

[zatazk]

bonjour reste a la version 214 pour l'interface rtl

[Maimeun]

Merci j'vais essayer de trouver sa alors [emoji4]

Envoyé de mon SM-G965F en utilisant Tapatalk

[khalil84]

bonne journée
es que Il fonctionne passthru avec scanmatik?

[eescham]

Envoyé par zatazk

bonjour reste a la version 214 pour l'interface rtl

Salut,

tu aurais la version 214 stp ?
Merci beaucoup