Lexia & PP2000 (from DiagBox 8.35) - Page 5

guyguy307 · 26/01/2017, 21h33

Yes and svg viewer

Simple · 30/01/2017, 23h37

The solution to this problem was as expected from the beginning, removing or commenting "version=08.xx" in "version.ini" and setting it to "version=07.xx" resolves the issue with Lexia and PP2000, like this:

[APPLICATION]
Version=07.817

This is explained in the DiagBox 8.01 Installation (updated) thread under Versions.

However, there is an interesting point here. When the option "Hide extensions for known file types" in the File Manager menu is checked, then file extensions do not show. In this case the user may be editing a file named "version.ini.txt" which will not work.

Hence, ensure that the option "Hide extensions for known file types" is unchecked so that you see file extensions.

Simple · 01/02/2017, 19h26

DiagBox 7.xx ends at 7.77. the rest is made up.. but if you insist, it virtually be 07.102

But you can enter 07.838 and it will work fine and it will give accurate indication of your DiagBox v8.

SASIKO · 25/11/2018, 21h25

Merci pour ce tuto complet

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
Quoi faire avec le xs evolution sous diagbox , pp2000, lexia	ishams2002	LEXIA, PP2000, DiagBox	7	14/11/2014 18h56
cherche logiciels diagbox, lexia et pp2000 originale	beka1975	LEXIA, PP2000, DiagBox	1	20/11/2013 22h06
Peugeot/Citroen DIAGBOX PP2000 LEXIA	bloker	LEXIA, PP2000, DiagBox	7	30/10/2013 06h27

26/01/2017, 21h33	#61
guyguy307 T-E master Date d'inscription: mai 2016 Localisation: france toulouse Âge: 40 Messages: 2 114 Thanks: 4 156 Thanked 2 599 Times in 1 155 Posts Pouvoir de réputation: 38	Yes and svg viewer

30/01/2017, 23h37	#62
Simple Membre attaché Date d'inscription: août 2014 Localisation: NA Messages: 279 Thanks: 5 Thanked 414 Times in 80 Posts Pouvoir de réputation: 20	The solution to this problem was as expected from the beginning, removing or commenting "version=08.xx" in "version.ini" and setting it to "version=07.xx" resolves the issue with Lexia and PP2000, like this: [APPLICATION] Version=07.817 This is explained in the DiagBox 8.01 Installation (updated) thread under Versions. However, there is an interesting point here. When the option "Hide extensions for known file types" in the File Manager menu is checked, then file extensions do not show. In this case the user may be editing a file named "version.ini.txt" which will not work. Hence, ensure that the option "Hide extensions for known file types" is unchecked so that you see file extensions.

01/02/2017, 19h26	#63
Simple Membre attaché Date d'inscription: août 2014 Localisation: NA Messages: 279 Thanks: 5 Thanked 414 Times in 80 Posts Pouvoir de réputation: 20	DiagBox 7.xx ends at 7.77. the rest is made up.. but if you insist, it virtually be 07.102 But you can enter 07.838 and it will work fine and it will give accurate indication of your DiagBox v8.

25/11/2018, 21h25	#64
SASIKO Membre Non Confirmé Date d'inscription: novembre 2018 Localisation: PARIS Âge: 34 Messages: 1 Thanks: 3 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	Merci pour ce tuto complet