I change the dash on Audi A3 TDI 2001 and the car didn't turn on

didi_du_93000 · 15/12/2008, 19h07

Hello,:):)

I change the dashboard on my audi A3, and now the car didn't tur on because the Immo is active.
I would like to remove the immo.

Please help me. :confused::confused:
Thanks

Didi

**Amine-TE** · 15/12/2008, 19h39

when you complete your profile we will help u ;)

Regards

didi_du_93000 · 15/12/2008, 21h00

I don't understand My profile is complete.
What is the problem?

jayontime · 15/12/2008, 21h55

you need to put where in paris i think like country then place

hope this helps

jayontime · 15/12/2008, 21h57

oh oh and read rules?

thats what i was told

same gose for every one els i think read rules more than once and
update profile with correct country and town

didi_du_93000 · 16/12/2008, 13h41

And now it's ok???

**Amine-TE** · 16/12/2008, 13h51

You can remove the old eprom from the old dash then solder it in the new one and the car will start ;)

didi_du_93000 · 16/12/2008, 13h57

Citation:

Envoyé par Tlemcen-Electronic

You can remove the old eprom from the old dash then solder it in the new one and the car will start ;)

If i turn off the immo on the ecu. the car turn on with the new dashboard?
On this dashborad the km is on the 68HC912. But the pin i don't know if it's on the same processour or no.
You know where is the pin and if is it possible for change this pin?

**Amine-TE** · 16/12/2008, 14h36

I dont know the adress for pin code, but try to see VagTacho if can do this job :)

jayontime · 16/12/2008, 15h01

pos:Dt file and i will look at it for you

didi_du_93000 · 16/12/2008, 15h21

Citation:

Envoyé par Tlemcen-Electronic

I dont know the adress for pin code, but try to see VagTacho if can do this job :)

i open the ECU. i found the eeprom 24c04. I would like to remove th immo.
But on Immokiller v1.10 he say it's a 24c02.

the ecu is a Bosch (0 281 010 308)
i joint the pictures.

What my soltion? :confused::confused:

thanks

**Amine-TE** · 16/12/2008, 20h59

Yes, use immokiller then check your PM

didi_du_93000 · 18/12/2008, 20h50

Hello, A friend remove the immo on my Audi A3. he use edc soft.
You know this soft?
I think it's not possible with IMMOKILLER because my ECU is a bosch edc15p+

thanks.

didi_du_93000 · 19/12/2008, 10h52

Citation:

Envoyé par 7Hex4

If you have hc912dg128 in dash the pin code is in address $84 and &85,
convert from hex to decimal

Br

Ho!!!!

Thanks for this infomation...
Very good information for the futur. ;)

15/12/2008, 19h07	#1
didi_du_93000 Membre trés attaché Date d'inscription: décembre 2008 Localisation: France, Paris Âge: 41 Messages: 566 Thanks: 217 Thanked 737 Times in 183 Posts Pouvoir de réputation: 23	I change the dash on Audi A3 TDI 2001 and the car didn't turn on Hello,:):) I change the dashboard on my audi A3, and now the car didn't tur on because the Immo is active. I would like to remove the immo. Please help me. :confused::confused: Thanks Didi

15/12/2008, 19h39	#2
Amine-TE Fondateur Date d'inscription: novembre 2008 Localisation: Offset: 0xFF25F255 Âge: 37 Messages: 120 890 Thanks: 2 674 Thanked 15 034 Times in 2 474 Posts Pouvoir de réputation: 1320	when you complete your profile we will help u ;) Regards __________________ Je ne donne pas d'aide en privé.

15/12/2008, 21h55	#4
jayontime Débutant T-E Date d'inscription: décembre 2008 Localisation: England,west hill Âge: 53 Messages: 30 Thanks: 23 Thanked 22 Times in 13 Posts Pouvoir de réputation: 0	profile you need to put where in paris i think like country then place hope this helps __________________ Remapping file service please join good priced files https://premier-remapping.com

15/12/2008, 21h57	#5
jayontime Débutant T-E Date d'inscription: décembre 2008 Localisation: England,west hill Âge: 53 Messages: 30 Thanks: 23 Thanked 22 Times in 13 Posts Pouvoir de réputation: 0	oh oh oh oh and read rules? thats what i was told same gose for every one els i think read rules more than once and update profile with correct country and town __________________ Remapping file service please join good priced files https://premier-remapping.com

16/12/2008, 13h51	#7
Amine-TE Fondateur Date d'inscription: novembre 2008 Localisation: Offset: 0xFF25F255 Âge: 37 Messages: 120 890 Thanks: 2 674 Thanked 15 034 Times in 2 474 Posts Pouvoir de réputation: 1320	You can remove the old eprom from the old dash then solder it in the new one and the car will start ;) __________________ Je ne donne pas d'aide en privé.

15/12/2008, 21h00	#3
didi_du_93000 Membre trés attaché Date d'inscription: décembre 2008 Localisation: France, Paris Âge: 41 Messages: 566 Thanks: 217 Thanked 737 Times in 183 Posts Pouvoir de réputation: 23	I don't understand My profile is complete. What is the problem?

16/12/2008, 13h41	#6
didi_du_93000 Membre trés attaché Date d'inscription: décembre 2008 Localisation: France, Paris Âge: 41 Messages: 566 Thanks: 217 Thanked 737 Times in 183 Posts Pouvoir de réputation: 23	And now it's ok???

16/12/2008, 14h36	#9
Amine-TE Fondateur Date d'inscription: novembre 2008 Localisation: Offset: 0xFF25F255 Âge: 37 Messages: 120 890 Thanks: 2 674 Thanked 15 034 Times in 2 474 Posts Pouvoir de réputation: 1320	I dont know the adress for pin code, but try to see VagTacho if can do this job :) __________________ Je ne donne pas d'aide en privé.

16/12/2008, 15h01	#10
jayontime Débutant T-E Date d'inscription: décembre 2008 Localisation: England,west hill Âge: 53 Messages: 30 Thanks: 23 Thanked 22 Times in 13 Posts Pouvoir de réputation: 0	pin pos:Dt file and i will look at it for you __________________ Remapping file service please join good priced files https://premier-remapping.com

16/12/2008, 20h59	#12
Amine-TE Fondateur Date d'inscription: novembre 2008 Localisation: Offset: 0xFF25F255 Âge: 37 Messages: 120 890 Thanks: 2 674 Thanked 15 034 Times in 2 474 Posts Pouvoir de réputation: 1320	Yes, use immokiller then check your PM __________________ Je ne donne pas d'aide en privé.

18/12/2008, 20h50	#13
didi_du_93000 Membre trés attaché Date d'inscription: décembre 2008 Localisation: France, Paris Âge: 41 Messages: 566 Thanks: 217 Thanked 737 Times in 183 Posts Pouvoir de réputation: 23	Hello, A friend remove the immo on my Audi A3. he use edc soft. You know this soft? I think it's not possible with IMMOKILLER because my ECU is a bosch edc15p+ thanks.