Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Categorie principale > Section for english users

Section for english users English talking about cars, problems and solutions ...

Banner mod-Files1
Réponse
 
Outils de la discussion
Vieux 16/06/2013, 06h49   #1
cairo_gsm
Membre Non Confirmé
 
Avatar de cairo_gsm
 
Date d'inscription: juin 2013
Localisation: Egypt
Messages: 2
Thanks: 0
Thanked 2 Times in 2 Posts
Pouvoir de réputation: 0
cairo_gsm is an unknown quantity at this point
Par défaut ECU code

Hi, I change my car ECU to used one bosch 06f 906 056 this ECU was used on bora 2005 automatic car, my car caddy life 2011 manual , how I can decode this ECU to work with manual transmitter as I have many problems for this , thnx
cairo_gsm est déconnecté   Réponse avec citation
The Following User Says Thank You to cairo_gsm For This Useful Post:
dhdesigner (24/04/2015)
Vieux 16/06/2013, 07h16   #2
cairo_gsm
Membre Non Confirmé
 
Avatar de cairo_gsm
 
Date d'inscription: juin 2013
Localisation: Egypt
Messages: 2
Thanks: 0
Thanked 2 Times in 2 Posts
Pouvoir de réputation: 0
cairo_gsm is an unknown quantity at this point
Par défaut

by the way I can easy read the EEPROM from this ECU if this can help
cairo_gsm est déconnecté   Réponse avec citation
The Following User Says Thank You to cairo_gsm For This Useful Post:
dhdesigner (24/04/2015)
Vieux 19/11/2013, 08h24   #3
Daniulis
Membre Non Confirmé
 
Avatar de Daniulis
 
Date d'inscription: novembre 2013
Localisation: Ireland, Dublin
Messages: 6
Thanks: 0
Thanked 1 Time in 1 Post
Pouvoir de réputation: 0
Daniulis is an unknown quantity at this point
Par défaut

Post part number of the original one, then I could tell you are they fit each other.
Daniulis est déconnecté   Réponse avec citation
Vieux 25/02/2014, 12h14   #4
dib47
Membre Non Confirmé
 
Avatar de dib47
 
Date d'inscription: février 2014
Localisation: uk, bristol
Messages: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
dib47 is an unknown quantity at this point
Par défaut

What was wrong with the original ecu ??
Can you pull original dump & flash from original to put in new ecu ?
If this doen't work then ecu is not compatable
dib47 est déconnecté   Réponse avec citation
Vieux 26/02/2014, 20h12   #5
majo
Membre Non Confirmé
 
Avatar de majo
 
Date d'inscription: février 2014
Localisation: paris
Messages: 4
Thanks: 1
Thanked 1 Time in 1 Post
Pouvoir de réputation: 0
majo is an unknown quantity at this point
Par défaut

you can use otockeck soft to read code
majo est déconnecté   Réponse avec citation
Vieux 19/03/2014, 10h51   #6
MadPilot
Membre Non Confirmé
 
Avatar de MadPilot
 
Date d'inscription: mars 2014
Localisation: Koenig Russia
Messages: 4
Thanks: 4
Thanked 11 Times in 2 Posts
Pouvoir de réputation: 0
MadPilot is on a distinguished road
Par défaut

Recoding ECU needed. I useing VCDS. Read coding in old ECU and write to new.
MadPilot est déconnecté   Réponse avec citation
Vieux 02/04/2015, 11h44   #7
fifii69
Débutant
 
Avatar de fifii69
 
Date d'inscription: mai 2014
Localisation: UK
Messages: 17
Thanks: 11
Thanked 20 Times in 10 Posts
Pouvoir de réputation: 0
fifii69 is on a distinguished road
Par défaut

You have a few different way to do it, you can desolder eeprom+flash , you can clone it use bdm , you can do adaptation in vcds, those all way will work only if ECUs hardware are same...
fifii69 est déconnecté   Réponse avec citation
Vieux 23/05/2015, 16h16   #8
westmanpt
Débutant
 
Avatar de westmanpt
 
Date d'inscription: janvier 2015
Localisation: Coimbra, Portugal
Messages: 13
Thanks: 2
Thanked 20 Times in 6 Posts
Pouvoir de réputation: 0
westmanpt is on a distinguished road
Par défaut

dont think a 2005 ecu will be same as 2011... as long they apear similar i really dont think hardware will be the same. what is the real problem with your caddy's ecu?
westmanpt est déconnecté   Réponse avec citation
The Following User Says Thank You to westmanpt For This Useful Post:
markello (24/05/2015)
Vieux 24/05/2015, 17h25   #9
markello
Membre Non Confirmé
 
Avatar de markello
 
Date d'inscription: mai 2015
Localisation: dublin
Messages: 4
Thanks: 5
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
markello is an unknown quantity at this point
Par défaut

Agree with @Westmanpt@ ECU will not be the same
markello est déconnecté   Réponse avec citation
Vieux 19/06/2015, 11h57   #10
pecirepi
Débutant
 
Avatar de pecirepi
 
Date d'inscription: novembre 2008
Localisation: Bosnia & Herzegovina
Âge: 40
Messages: 20
Thanks: 5
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
pecirepi is an unknown quantity at this point
Par défaut

you have few options.
to check ecu type edc16u1, u31 ...
if same type of ecu then you have options to make clone of your ecu to new used ecu, with this option you will solve all problems with coding and other stuff. but for this option you need to have tool which can clone that type of ecu.
next thing is to send here eeprom from old ecu and new ecu, so we can check ecus.
third thing is to disable immo in eeprom and to use vcds and to read original codings from old ecu and to recode new ecu with original numbers.

it is up to you to decide and to told us what kind of tools you have so we can help you.
__________________
Ivan Pecirep
pecirepi est déconnecté   Réponse avec citation
Vieux 17/10/2015, 09h43   #11
piranha--
Membre Non Confirmé
 
Avatar de piranha--
 
Date d'inscription: octobre 2015
Localisation: Lija, Malta
Messages: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
piranha-- is an unknown quantity at this point
Par défaut

05-11 ecu will be cpmpletly different.

did ypu try code with vcds?
piranha-- est déconnecté   Réponse avec citation
Vieux 21/10/2015, 11h06   #12
simon932
Membre Non Confirmé
 
Avatar de simon932
 
Date d'inscription: octobre 2015
Localisation: Poland/Krakow
Messages: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
simon932 is an unknown quantity at this point
Par défaut

Buy the correct driver (year) and re-code VCDS ;)
simon932 est déconnecté   Réponse avec citation
Vieux 24/10/2015, 15h49   #13
carpin
Membre Non Confirmé
 
Avatar de carpin
 
Date d'inscription: octobre 2015
Localisation: Netherlands Amsterdam
Messages: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0
carpin is an unknown quantity at this point
Par défaut

Citation:
Envoyé par simon932 Voir le message
Buy the correct driver (year) and re-code VCDS ;)
cairo_gsm has to buy the vcds or vag com profesional tool

And this message is very old
carpin est déconnecté   Réponse avec citation
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide


Fuseau horaire GMT +1. Il est actuellement 22h06.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved