Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Outils & Diag > Outils de diagnostique > LEXIA, PP2000, DiagBox

autotool
Réponse
 
Outils de la discussion
Vieux 13/11/2016, 11h34   #1
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut Lexia & PP2000 (from DiagBox 8.35)

I have attached the APP folder from DiagBox v8.35, it includes Lexia v500.74 and PP2000 v600.79. This arrangement should work with any DiagBox v7.xx and/or DiagBox 8.xx, I have tried it on my own car and it seems to be working fine.

The attachment within this post includes a link to the "APP" folder and a batch file to kill all DiagBox processes.

If you wish to try it (at your own risk and having taken all precautions!):
1- Use the attached “Kill_DiagBox_Tasks.bat” to stop all DiagBox’s processes.
2- Rename your current “C:\APP” folder to “C:\APP8”
3- Extract the downloaded APP-835.7z to “C:\” so that you have “C:\APP”
4- Restart your computer and run DiagBox as usual.

Have fun!

The language is set to English, if you wish to change it, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR".

If you wish to revert to your original setup.
- Kill all processes again using the wicked batch file
- Rename the C:\APP folder to anything or delete it
- Rename your C:\APP8 back to C:\APP
- Restart the computer and start DiagBox.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Regards, Simple.
Fichiers attachés
Type de fichier : zip APP-835+Kill_DiagBox_Tasks.zip (811 octets, 254 affichages)
Simple est déconnecté   Réponse avec citation
The Following 11 Users Say Thank You to Simple For This Useful Post:
ElTurco (09/12/2018), Evasion_Td12 (07/02/2019), jardini (04/10/2017), mahmoudfs (05/06/2020), marianro2007 (24/11/2016), maskcoto (23/08/2017), maxer (30/09/2018), mik@ (16/05/2020), REDZONE31 (02/11/2017), sivestiano (31/12/2021), tatel (02/02/2018)
Vieux 22/11/2016, 19h03   #2
nikita
Membre attaché
 
Avatar de nikita
 
Date d'inscription: décembre 2015
Localisation: France, Libourne
Messages: 227
Thanks: 109
Thanked 219 Times in 72 Posts
Pouvoir de réputation: 12
nikita is a jewel in the roughnikita is a jewel in the roughnikita is a jewel in the roughnikita is a jewel in the rough
Par défaut

thanks bro
nikita est déconnecté   Réponse avec citation
Vieux 24/11/2016, 07h33   #3
nikita
Membre attaché
 
Avatar de nikita
 
Date d'inscription: décembre 2015
Localisation: France, Libourne
Messages: 227
Thanks: 109
Thanked 219 Times in 72 Posts
Pouvoir de réputation: 12
nikita is a jewel in the roughnikita is a jewel in the roughnikita is a jewel in the roughnikita is a jewel in the rough
Par défaut

salut
tester il me redemande une activation maintenant
nikita est déconnecté   Réponse avec citation
Vieux 24/11/2016, 09h17   #4
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

I have tried this on a number of machines without a problem. I hope you did not make changes in "AWRoot".

Restore your backup copy of "APPDIAG.SYS", if it still does not work, then restore the old APP folder and restore APPDIAG.SYS.

Please provide me with your setup details and what did you try, I will try to replicate what you have done to see what is the problem.
Simple est déconnecté   Réponse avec citation
Vieux 24/11/2016, 09h33   #5
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

By the way, make sure you are running DiagBox as Administrator.
Simple est déconnecté   Réponse avec citation
Vieux 24/11/2016, 09h37   #6
DIAGAUTO33
Membre accro
 
Avatar de DIAGAUTO33
 
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 466
Thanks: 2 011
Thanked 1 234 Times in 550 Posts
Pouvoir de réputation: 30
DIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant future
Par défaut

Merci pour ton partage Simple.

J'ai la version 8.18 de Maitresox, je peux installer la tienne sans probleme ?

Tu as testé télécodage avec ?

Merci pour ton aide l'ami.
DIAGAUTO33 est déconnecté   Réponse avec citation
Vieux 24/11/2016, 10h12   #7
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

I have few test installations, but only one Citroen C8 car.. I did test update 8.35 on my car on Windows XP, 7 and 10.. and I have no problem..

I do not know if other cars like Peugeot 207 have problems or not, but other users can try.
Simple est déconnecté   Réponse avec citation
Vieux 24/11/2016, 10h59   #8
DIAGAUTO33
Membre accro
 
Avatar de DIAGAUTO33
 
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 466
Thanks: 2 011
Thanked 1 234 Times in 550 Posts
Pouvoir de réputation: 30
DIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant future
Par défaut

Ok.
Je vais testé dès que je peux et je tiens au courant.

Merci encore.
DIAGAUTO33 est déconnecté   Réponse avec citation
Vieux 25/11/2016, 07h55   #9
DIAGAUTO33
Membre accro
 
Avatar de DIAGAUTO33
 
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 466
Thanks: 2 011
Thanked 1 234 Times in 550 Posts
Pouvoir de réputation: 30
DIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant future
Par défaut

Salut, j'ai testé sur C8 CAN ok.

Après la manip décrite par notre ami simple pour mettre lexia et pp2000 en FR, tout est ok.
Test télécodage sur abs ou bsi ok.

Par contre, j'aimerai savoir si cette mise à jour mets seulement pp2000 et lexia à jour ou ça mets également diagbox à jour ?

Avant, l'appli ne se connecté plus à internet et maintenant, diagbox cherche à se re connecter souvent. C'est pas trop grave mais c'est lassant. J'ai tenté avec le tlcd.fix de notre ami scary mais c'est pareil.

Je continu les test puis je vous tient informé.

Merci encore simple !
DIAGAUTO33 est déconnecté   Réponse avec citation
Vieux 25/11/2016, 08h41   #10
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

Thank you DIAGAUTO33 for your effort and reporting back. The update only updates Lexia + PP2000 and all associated engines such as SIM, JAVA etc...

There may be one issue, which is relevant to language coding from 2 to 5 characters (FR or fr_FR), this may be a concern specific installations and only affects DiagBox not Lexia or PP2000.

I found the best way is to install DiagBox 8.xx then update APP to 8.35. This way every thing works well together and all your files are original and not manipulated or changed.
Simple est déconnecté   Réponse avec citation
Vieux 25/11/2016, 09h50   #11
DIAGAUTO33
Membre accro
 
Avatar de DIAGAUTO33
 
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 466
Thanks: 2 011
Thanked 1 234 Times in 550 Posts
Pouvoir de réputation: 30
DIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant future
Par défaut

Ok l'ami mais impossible d'installer une version 8 il me semble ...

J'ai la version 7.82 de notre ami maitresox.

Si tu as la solution pour installer et activer la version 8.xx fonctionnelle, je veux bien tenter l'ami.

Merci encore.
@+
DIAGAUTO33 est déconnecté   Réponse avec citation
Vieux 25/11/2016, 10h19   #12
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

No it is not impossible to install DiagBox v8.xx, I already wrote how to do that, it is much tidier on other sites because I can edit and update my posts (which I cannot do on this site).

However, v7.82 should not have problems with this APP folder update..
Simple est déconnecté   Réponse avec citation
Vieux 26/11/2016, 12h02   #13
maitresox
Membre trés attaché
 
Avatar de maitresox
 
Date d'inscription: décembre 2011
Localisation: France/Pays de Loire
Messages: 746
Thanks: 409
Thanked 3 751 Times in 401 Posts
Pouvoir de réputation: 66
maitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond repute
Par défaut

Salut
La version 8.36 est sortie avec le nouveau 5008


A+
maitresox est déconnecté   Réponse avec citation
The Following 2 Users Say Thank You to maitresox For This Useful Post:
DIAGAUTO33 (27/11/2016), SASIKO (25/11/2018)
Vieux 26/11/2016, 13h34   #14
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

Thanks maitresox,
I am not sure I understand PSA's procedure with respect to updates and their availability.

I downloaded "inter8_36.rar" last week, the French site announced it on Tuesday while it is still not announced on the English site!!!

However, for the past 3 days, it is no longer available for download. I hope they did not discover a bug that necessitated pulling it back.
Images attachées
Type de fichier : jpg inter8_36.jpg (99,7 Ko, 87 affichages)
Simple est déconnecté   Réponse avec citation
Vieux 28/11/2016, 10h31   #15
DIAGAUTO33
Membre accro
 
Avatar de DIAGAUTO33
 
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 466
Thanks: 2 011
Thanked 1 234 Times in 550 Posts
Pouvoir de réputation: 30
DIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant futureDIAGAUTO33 has a brilliant future
Par défaut

Merci pour les infos les gars.

Tu tournes avec la 8.36 maitresox ou c'est le pc de ton taf ?
DIAGAUTO33 est déconnecté   Réponse avec citation
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
Quoi faire avec le xs evolution sous diagbox , pp2000, lexia ishams2002 LEXIA, PP2000, DiagBox 7 14/11/2014 19h56
cherche logiciels diagbox, lexia et pp2000 originale beka1975 LEXIA, PP2000, DiagBox 1 20/11/2013 23h06
Peugeot/Citroen DIAGBOX PP2000 LEXIA bloker LEXIA, PP2000, DiagBox 7 30/10/2013 07h27


Fuseau horaire GMT +1. Il est actuellement 16h57.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved