Temic 2840211407

slklite · 07/06/2019, 16h22

Salam à tous, quelqu'un aurait un clear pour ce fichier de kangoo svp ?

3id Moubarak Sa3id (pour les concernés)

Je vous remercie.

@ bientôt ;)

**volavka** · 07/06/2019, 16h47

Check PM ................!

slklite · 07/06/2019, 21h05

Thanks, will try and report.

slklite · 11/06/2019, 12h15

I tried, it's not working. Fault code 9012 un memory and won't erase :(

Any Idea ?

Thank you.

**volavka** · 11/06/2019, 12h45

unlock airbag ecu by can clip

slklite · 11/06/2019, 12h58

Thank you for your answer, so eeprom is good ? No need to reprogram it ?

Can't do it with anything else ?

I don't have can clip :(

What is the label from this fault code ?

Thanks.

slklite · 05/08/2019, 20h18

Hello, finally received can clip. And when i connected to unlock ecu. The fault stores was about a belt pretentioner. No fault code about unlocking ecu.

So i guess it's finished !!!

Thank you !!!

11/06/2019, 12h45	#5
volavka V.I.P Date d'inscription: novembre 2012 Localisation: Tetouan - Morocco Messages: 282 Thanks: 87 Thanked 637 Times in 209 Posts Pouvoir de réputation: 20	unlock airbag ecu by can clip __________________ Br. Mouad Amenchar

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
besoin clear 2840211407 temic kangoo	formator2	Airbag	2	21/04/2016 15h29
Golf 1.8 TEMIC	guilleepsis	Réparation & Programmation des calculateurs	0	04/06/2015 21h48
2840211407	nimbus	Airbag	6	03/01/2014 21h16
Temic 8201 163 278	cletek	Airbag	1	13/04/2013 10h15
air bag C2 temic	slv	Airbag	1	16/05/2011 17h37

07/06/2019, 21h05	#3
slklite Membre attaché Date d'inscription: septembre 2013 Localisation: France / Grenoble Messages: 244 Thanks: 87 Thanked 37 Times in 30 Posts Pouvoir de réputation: 11	Thanks, will try and report.

11/06/2019, 12h15	#4
slklite Membre attaché Date d'inscription: septembre 2013 Localisation: France / Grenoble Messages: 244 Thanks: 87 Thanked 37 Times in 30 Posts Pouvoir de réputation: 11	I tried, it's not working. Fault code 9012 un memory and won't erase :( Any Idea ? Thank you.

11/06/2019, 12h58	#6
slklite Membre attaché Date d'inscription: septembre 2013 Localisation: France / Grenoble Messages: 244 Thanks: 87 Thanked 37 Times in 30 Posts Pouvoir de réputation: 11	Thank you for your answer, so eeprom is good ? No need to reprogram it ? Can't do it with anything else ? I don't have can clip :( What is the label from this fault code ? Thanks.

05/08/2019, 20h18	#7
slklite Membre attaché Date d'inscription: septembre 2013 Localisation: France / Grenoble Messages: 244 Thanks: 87 Thanked 37 Times in 30 Posts Pouvoir de réputation: 11	Hello, finally received can clip. And when i connected to unlock ecu. The fault stores was about a belt pretentioner. No fault code about unlocking ecu. So i guess it's finished !!! Thank you !!!