Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Product Support Sections > Support officiel des produits original (hardware/software) > Revue Technique Auto

VF2
Réponse
 
Outils de la discussion
Vieux 08/07/2020, 15h11   #1
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut Cherche schéma 807 HDI

Bonjour,
je cherche le schéma électrique de la direction assistée pour une 807 2L HDI année 2006, 136CH.
la Pompe hydraulique de direction est neuve et bien alimenté et dur, mais je ne communique pas avec.
J'ai le défaut avec diagbox dans la direction assistée: erreur de communication
Et sur hayness pro j'ai pas cette partie la.
Si quelqu’un à le schéma je suis preneur merci d'avance.
matrix28 est déconnecté   Réponse avec citation
Vieux 08/07/2020, 20h58   #2
dreamland
Membre accro
 
Avatar de dreamland
 
Date d'inscription: septembre 2009
Localisation: France : Toulouse
Messages: 1 494
Thanks: 1 149
Thanked 2 262 Times in 1 055 Posts
Pouvoir de réputation: 43
dreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond repute
Par défaut

Hello

Voici une version de base , il faut le VIN en mp pour confirmation de la bonne version .

A+
Fichiers attachés
Type de fichier : rar DA 807.rar (99,4 Ko, 16 affichages)
dreamland est déconnecté   Réponse avec citation
The Following 2 Users Say Thank You to dreamland For This Useful Post:
martinn (09/07/2020), matrix28 (09/07/2020)
Vieux 09/07/2020, 08h44   #3
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par dreamland Voir le message
Hello

Voici une version de base , il faut le VIN en mp pour confirmation de la bonne version .

A+
Merci dreamland, je vais voir si je trouve le problème avec ton schéma.
matrix28 est déconnecté   Réponse avec citation
The Following User Says Thank You to matrix28 For This Useful Post:
dreamland (09/07/2020)
Vieux 10/07/2020, 08h04   #4
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par matrix28 Voir le message
Merci dreamland, je vais voir si je trouve le problème avec ton schéma.
Par rapport au vin tu penses que c'est le bon schéma ?
matrix28 est déconnecté   Réponse avec citation
Vieux 11/07/2020, 14h15   #5
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par matrix28 Voir le message
Par rapport au vin tu penses que c'est le bon schéma ?
Avez vous un autre schéma, le can bus ne correspond pas merci.
matrix28 est déconnecté   Réponse avec citation
Vieux 11/07/2020, 14h22   #6
zenata
TE-MANIA
 
Avatar de zenata
 
Date d'inscription: janvier 2012
Localisation: maroc casablanca
Messages: 9 074
Thanks: 7 186
Thanked 14 962 Times in 6 909 Posts
Pouvoir de réputation: 171
zenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond reputezenata has a reputation beyond repute
Par défaut

Slt
https://play.google.com/store/apps/d....min.car&hl=fr
pour 807 , c'est en russe , mais avec un traducteur c'est possible
et si tu y arrives pas , je te trouve la rta
__________________
“Le vrai signe de l’intelligence, ce n’est pas la connaissance, mais l’imagination”
zenata est déconnecté   Réponse avec citation
The Following User Says Thank You to zenata For This Useful Post:
matrix28 (12/07/2020)
Vieux 11/07/2020, 17h48   #7
dreamland
Membre accro
 
Avatar de dreamland
 
Date d'inscription: septembre 2009
Localisation: France : Toulouse
Messages: 1 494
Thanks: 1 149
Thanked 2 262 Times in 1 055 Posts
Pouvoir de réputation: 43
dreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond reputedreamland has a reputation beyond repute
Par défaut

Citation:
Envoyé par matrix28 Voir le message
Avez vous un autre schéma, le can bus ne correspond pas merci.
Hello

Pourquoi cela ne correspond pas ? tu devrais nous en dire plus.
J'ai vérifié sur PSA et Atélio et ton VIN correspond au schéma que je t'ai laissé .

A+
dreamland est déconnecté   Réponse avec citation
Vieux 12/07/2020, 00h09   #8
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par dreamland Voir le message
Hello

Pourquoi cela ne correspond pas ? tu devrais nous en dire plus.
J'ai vérifié sur PSA et Atélio et ton VIN correspond au schéma que je t'ai laissé .

A+
Quand je teste la ligne can 1 et 3 sur la broche à trois fils ( 3V NR ) de l'électropompe de direction à la broche 90015 et 90005 du bloc ABS ESP, sa ne correspond pas. aucune continuité entre les deux. Merci
matrix28 est déconnecté   Réponse avec citation
Vieux 12/07/2020, 06h15   #9
guidou24
Débutant
 
Avatar de guidou24
 
Date d'inscription: mars 2018
Localisation: Algérie, Guelma
Âge: 49
Messages: 28
Thanks: 76
Thanked 330 Times in 23 Posts
Pouvoir de réputation: 0
guidou24 is a jewel in the roughguidou24 is a jewel in the roughguidou24 is a jewel in the roughguidou24 is a jewel in the rough
Par défaut

voir ici : http://www.peu807.net/
guidou24 est déconnecté   Réponse avec citation
The Following User Says Thank You to guidou24 For This Useful Post:
matrix28 (15/07/2020)
Vieux 12/07/2020, 20h14   #10
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut

Citation:
Envoyé par matrix28 Voir le message
Quand je teste la ligne can 1 et 3 sur la broche à trois fils ( 3V NR ) de l'électropompe de direction à la broche 90015 et 90005 du bloc ABS ESP, sa ne correspond pas. aucune continuité entre les deux. Merci
Salut, ta panne est peut etre la!
Si tu ne communique pas avec un ecu et qu'il est bien alimenté c'est qu'il y a un probleme de reseau. D'ailleurs les autres calculos du meme reseau devrais remonté un defaut de communication avec le GEP
barthdu22 est déconnecté   Réponse avec citation
The Following User Says Thank You to barthdu22 For This Useful Post:
matrix28 (14/07/2020)
Vieux 14/07/2020, 07h45   #11
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par barthdu22 Voir le message
Salut, ta panne est peut etre la!
Si tu ne communique pas avec un ecu et qu'il est bien alimenté c'est qu'il y a un probleme de reseau. D'ailleurs les autres calculos du meme reseau devrais remonté un defaut de communication avec le GEP
Oui je sais très bien c'est un problème de réseau, c'est pour cela que je cherche le bon schéma. le véhicule à eu un accident et la fiche à trois fils est arrachée avec la couleur bleu et blanc torsadé pour le can et l'autre pour l'alimentation. je voulais savoir sur quel numéro du connecteur à 3 fils vont les fils du can de couleur blanc et bleu. le + est sur la broche 2 et il me manque le 1 et 3 à trouver. Merci
matrix28 est déconnecté   Réponse avec citation
Vieux 14/07/2020, 08h13   #12
pp08
Membre accro
 
Avatar de pp08
 
Date d'inscription: juillet 2015
Localisation: france,ardennes
Messages: 1 665
Thanks: 7 545
Thanked 2 042 Times in 1 007 Posts
Pouvoir de réputation: 30
pp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond reputepp08 has a reputation beyond repute
Par défaut

bonjour

voici un lien de la RTA il y a tous les schémas electrique

bonne journée

https://mega.nz/file/Z6B3HAQT#1ar6Gy...JPSsIbPvylLWUk


si tu peux donner une réponse, si ca ta servi ou pas ?

Dernière modification par pp08 ; 14/07/2020 à 09h48.
pp08 est connecté maintenant   Réponse avec citation
The Following User Says Thank You to pp08 For This Useful Post:
matrix28 (14/07/2020)
Vieux 14/07/2020, 09h49   #13
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut

Salut, sur le connecteur 3voies noire du GEP tu doit avoir:
en borne 1 le fil can N°9000Z
en borne 2 le fil + N°C712A
en borne 3 le fil can N°9001Z

Dans le post N°1 tu dis avoir changer le GEP mais tu a mis un neuf, occaz, Tu as la reference ?
barthdu22 est déconnecté   Réponse avec citation
The Following User Says Thank You to barthdu22 For This Useful Post:
matrix28 (15/07/2020)
Vieux 14/07/2020, 10h30   #14
matrix28
Membre trés attaché
 
Avatar de matrix28
 
Date d'inscription: novembre 2014
Localisation: Rosny sous bois 93 seine saint denis
Messages: 826
Thanks: 558
Thanked 293 Times in 190 Posts
Pouvoir de réputation: 13
matrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the roughmatrix28 is a jewel in the rough
Par défaut

Citation:
Envoyé par barthdu22 Voir le message
Salut, sur le connecteur 3voies noire du GEP tu doit avoir:
en borne 1 le fil can N°9000Z
en borne 2 le fil + N°C712A
en borne 3 le fil can N°9001Z

Dans le post N°1 tu dis avoir changer le GEP mais tu a mis un neuf, occaz, Tu as la reference ?
Oui c'est un neuf, et j'ai déjà tous vérifier mais le schéma ne correspond pas à mon modèle et j'ai 2.5 V sur ma ligne can et en 2 j'ai bien le 12V, j'ai donné la couleur des fils parce que les numéros sont arrachés.

---------- Post added at 08h30 ---------- Previous post was at 08h27 ----------

Citation:
Envoyé par pp08 Voir le message
bonjour

voici un lien de la RTA il y a tous les schémas electrique

bonne journée

https://mega.nz/file/Z6B3HAQT#1ar6Gy...JPSsIbPvylLWUk


si tu peux donner une réponse, si ca ta servi ou pas ?
Merci, je vais voir si c'est bon
matrix28 est déconnecté   Réponse avec citation
Vieux 14/07/2020, 17h34   #15
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut

Salut, de toute facon tu n'a pas 36 choix possibles, sachant que +12volts arrive en borne 2 il te reste plus qu'a essayer les fils en 1 et 3 et si cela ne fonctionne pas tu peux les permuter
barthdu22 est déconnecté   Réponse avec citation
The Following User Says Thank You to barthdu22 For This Useful Post:
matrix28 (15/07/2020)
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
Cherche schéma 508 saber schémas de câblage, documentation 2 30/09/2019 12h56
Cherche schéma connection X5 E59 Sebas974 Compteur kilométrique 0 06/05/2015 00h13
Cherche schema Velsatis VELSATIS schémas de câblage, documentation 11 27/07/2014 20h12
cherche schéma ecu angelman Pinout calculateurs et bootmode 3 02/11/2013 22h56
Cherche schéma electrique 206 1.1 beka1975 Peugeot, Citroën 2 25/10/2013 00h03


Fuseau horaire GMT +1. Il est actuellement 09h41.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved