citroen

Volik8 · 20/03/2019, 14h55

Hello, you need to disable the immobilizer on Citroen, can someone help?
ecu bosch edc17c10

zouaoui mohamed · 20/03/2019, 15h00

Hi post your file you can help

Volik8 · 20/03/2019, 17h08

Help guys please !!!

Volik8 · 21/03/2019, 10h04

Hello !! Can someone help

yann3 · 21/03/2019, 12h54

like that and go back
forget not thank you
paas ,mp

Bemich · 21/03/2019, 16h38

Please post Résulta Volik8

Volik8 · 22/03/2019, 11h31

Hello colleagues, the car started but there is a problem, the bsi unit does not understand that the car is running, and the wipers do not have anything working ...
there is an error in the bsi block by immobilizer, please correct the dump bsi

yann3 · 22/03/2019, 12h01

Hi, I do not see the relationship between ecu engine and bsi
when making an ecu immobilizer, do not touch the bsi.
the problem is probably

kitopa · 22/03/2019, 13h31

Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

yann3 · 23/03/2019, 08h40

Hi
the car did not start after a worry bsi, probably.immo off put the engine back into operation, but can not do anything for the bsi.
you have to change the bsi and you swap eeprom

salut
la voiture ne demarrait pas suite a un soucis bsi,probablement.l´immo off a remis le moteur en fonctionnement ,mais ne peut rien pour le bsi.
il faut que tu change le bsi et tu swap l´eeprom

Volik8 · 28/03/2019, 15h32

Citation:

Envoyé par kitopa

Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

Hello to all !!
Replaced BSI The problem remained !!!
BSI does not see the engine running, BSI remains in economy mode.
Electric power steering also does not work.
The battery charging light is on when the engine is running. Errors in the engine control unit
U1401
U1218
U1213
What to do???

yann3 · 29/03/2019, 07h53

Hi
control the bus can h and ldu abs box, surely him that prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

---------- Post added at 08h53 ---------- Previous post was at 08h52 ----------

Hi
control bus can h and l of the abs box, surely it prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

yann3 · 29/03/2019, 11h53

as said ggvaniou, you will need the eeprom too
https://www.tlemcen-electronic.com/f...ad.php?t=81606

mexicain · 30/03/2019, 11h03

Hello test

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
pin bsi jc citroen	brahim chafa3	Transponder, code pin	1	31/03/2018 22h21
Citroen dumps immo off tested for citroen 100/100 ok	lassad	Immobilizer dumps/solutions	0	14/01/2016 14h18
citroen c3 1.1	autodiagnos kamal	Transponder, code pin	2	22/03/2013 21h10
Citroen Lexia 347.19 + Citroen C5 2001-2008 Multilingual	TAGRART	LEXIA, PP2000, DiagBox	0	16/11/2012 16h48
citroen c2	thepatrick31	Airbag	1	11/04/2010 18h38

20/03/2019, 15h00	#2
zouaoui mohamed Membre trés attaché Date d'inscription: janvier 2013 Localisation: Algérie, alger Messages: 804 Thanks: 193 Thanked 573 Times in 276 Posts Pouvoir de réputation: 21	Hi post your file you can help

20/03/2019, 17h08	#3
Volik8 Débutant Date d'inscription: février 2019 Localisation: Ukraine Âge: 51 Messages: 23 Thanks: 5 Thanked 5 Times in 2 Posts Pouvoir de réputation: 0	Help guys please !!!

21/03/2019, 10h04	#4
Volik8 Débutant Date d'inscription: février 2019 Localisation: Ukraine Âge: 51 Messages: 23 Thanks: 5 Thanked 5 Times in 2 Posts Pouvoir de réputation: 0	Hello !! Can someone help

21/03/2019, 16h38	#6
Bemich Membre habitué T-E Date d'inscription: mai 2015 Localisation: Madagascar/Majunga Messages: 117 Thanks: 86 Thanked 32 Times in 26 Posts Pouvoir de réputation: 9	Please post Résulta Volik8

22/03/2019, 12h01	#8
yann3 Genious T-E Date d'inscription: septembre 2016 Localisation: Bretagne Âge: 53 Messages: 4 681 Thanks: 2 394 Thanked 5 435 Times in 3 048 Posts Pouvoir de réputation: 66	Hi, I do not see the relationship between ecu engine and bsi when making an ecu immobilizer, do not touch the bsi. the problem is probably

22/03/2019, 13h31	#9
kitopa Membre attaché Date d'inscription: septembre 2013 Localisation: France, Paris Messages: 226 Thanks: 106 Thanked 101 Times in 57 Posts Pouvoir de réputation: 12	Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

23/03/2019, 08h40	#10
yann3 Genious T-E Date d'inscription: septembre 2016 Localisation: Bretagne Âge: 53 Messages: 4 681 Thanks: 2 394 Thanked 5 435 Times in 3 048 Posts Pouvoir de réputation: 66	Hi the car did not start after a worry bsi, probably.immo off put the engine back into operation, but can not do anything for the bsi. you have to change the bsi and you swap eeprom salut la voiture ne demarrait pas suite a un soucis bsi,probablement.l´immo off a remis le moteur en fonctionnement ,mais ne peut rien pour le bsi. il faut que tu change le bsi et tu swap l´eeprom

29/03/2019, 07h53	#12
yann3 Genious T-E Date d'inscription: septembre 2016 Localisation: Bretagne Âge: 53 Messages: 4 681 Thanks: 2 394 Thanked 5 435 Times in 3 048 Posts Pouvoir de réputation: 66	Hi control the bus can h and ldu abs box, surely him that prevents communication between bsi, engine ECU and power steering. so shunt the can h and l of the abs case ---------- Post added at 08h53 ---------- Previous post was at 08h52 ---------- Hi control bus can h and l of the abs box, surely it prevents communication between bsi, engine ECU and power steering. so shunt the can h and l of the abs case

29/03/2019, 11h53	#13
yann3 Genious T-E Date d'inscription: septembre 2016 Localisation: Bretagne Âge: 53 Messages: 4 681 Thanks: 2 394 Thanked 5 435 Times in 3 048 Posts Pouvoir de réputation: 66	as said ggvaniou, you will need the eeprom too https://www.tlemcen-electronic.com/f...ad.php?t=81606