|
04-18-2011, 11:10 PM
|
#1 |
|
Membre attaché
Join Date: Apr 2010
Location: Algérie, Costan,tine
Posts: 203
Thanks: 162
Thanked 64 Times in 36 Posts
Rep Power: 16  |
Vas regeneration fap
salut les amis je veux savoir es que le vas pc fait la régénération du fap ?
si c'est ok que sont les étapes a suivre? ( j'ai la version 17 en français) mérçi d'avance de me guider. Last edited by nany; 06-29-2011 at 03:21 PM. |
|
|
| The Following User Says Thank You to stofa-25 For This Useful Post: | aissam620 (05-23-2011) |
|
04-20-2011, 08:09 PM
|
#3 |
|
Membre habitué T-E
Join Date: Oct 2009
Location: TLEMCEN algerie
Posts: 185
Thanks: 326
Thanked 86 Times in 59 Posts
Rep Power: 18 |
et avec le vcds? merci
|
|
|
|
|
06-29-2011, 02:41 PM
|
#4 | |
|
Membre habitué T-E
Join Date: Jun 2011
Location: France/Région Centre
Posts: 108
Thanks: 87
Thanked 128 Times in 29 Posts
Rep Power: 16 |
Quote:
Tout dépend de ton moteur, je sais que sur le 2.7TDI et sur le 3.0TDI il faut taper le code: 10016 Particle Filter Emergency Regeneration Prerequisites: Ignition ON Engine ON (Idle) Oil Temperature above 70 °C (see MVB 007.2) Particle Filter Load below 68g (see MVB 104.3) If the Particle Filter Load is above 68g the Particle Filter needs to be replaced since the car may burn down when regenerating. Engine Hood CLOSED Parking Brake ENGAGED Transmission in (P)ARK Temperatures at the Exhaust System may rise up to 300 °C!!! No Fault Codes Stored Power Consumers ON (Light, Seat Heating, Front/Rear Window Heater, Climate Control) The Regeneration may take up to 40 minutes, the engine speed automatically increases to about 1500 RPM. [Select] [01 - Engine] [Coding-II - 11] Start Regeneration by Entering 10016. [Do It!] [Meas. Blocks - 08] Select all 3 Groups at once 100, 101 and 102 [Go!] MVB 100.1: Engine Speed MVB 100.3: Regeneration Counter/Timer MVB 100.4: Regeneration Abort recognized (0 = No Abort/1 = Abort recognized) MVB 101.4: Regeneration Status (001 = Heating Up, 010 = Regeneration, 100 = Cooling Down) MVB 102.1: Temperature before Catalyst MVB 102.2: Temperature before Particle Filter [Done, Go Back] [Close Controller, Go Back - 06] Je le fait régulierement... |
|
|
|
|
| The Following 4 Users Say Thank You to TR-DELIGHT For This Useful Post: |
|
01-12-2012, 07:51 AM
|
#5 | |
|
Membre Non Confirmé
Join Date: Jan 2012
Location: France, Paris
Posts: 9
Thanks: 10
Thanked 4 Times in 4 Posts
Rep Power: 0 |
FAP Golf VI
Quote:
J'essai de trouver ou se trouve cette fonction dans "Assistant Depannage" mais je ne l'a trouve pas. Est ce que quelqu'un pourrait me guider afin d'arriver a cette etape Merci d'avance Golf VI 2.0 TDI 2009 PS : j'ai essaye de suivre l'etape de ce lien mais je ne trouve pas "tester les cendres" http://www.tlemcen-electronic.com/fo...39&postcount=4 Last edited by copbac; 01-12-2012 at 08:12 AM. |
|
|
|
|
| Sponsored Link |
 |
| Bookmarks |
|
|
