si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

Simple · 07-20-2017, 01:00 PM

The software provided is intended for personal, educational and experimental use; to help with DiagBox installations and XS Evolution VCI communication. I hold no responsibility for any illegal or improper usage or any damage to your system. Carry out upgrade at your own risk.

For those interested in experimenting with the different DiagBox firmware versions, I have attached the latest (to-date) Application (Appli.com 4.3.5, DiagBox v8.45) and Blue Tooth (1.2.4, DiagBox v8.43) Firmware.

I have also included the older BT firmware (1.2.3, DiagBox v8.30) as it includes the HEX file, in case someone needs it.

Simple..

Simple · 07-24-2017, 03:45 PM

The are 2 ways of up****** XS Evolution VCI Firmware,

1- Automatic up******, Follow instructions in this link:
http://www.tlemcen-electronic.com/fo...560#post540560

2- Manual up******, download and install "PSA Interface Checker Install.exe",
a- Ensure XS Evolution VCI is connected and recognised
b- Click on Activate, greyed buttons will become active
c- Click Version to check current version
d- Click Select file to choose the Firmware file desired for upgrade
e- Click Downloading to start the flashing process.

Please wait 5 seconds after the flashing process finished and before disconnecting or starting other application, to ensure no flashing corruption.

djslowrnb · 09-26-2017, 12:06 PM

Thanks simple i use version 7.83 how to know the good firmware fot this version depend car to dagnostic?
thanks!!!

Simple · 09-26-2017, 09:53 PM

DiagBox from version 7.66/8.02 to 8.44 has 4.3.4, but users have used other versions successfully.

djslowrnb · 09-26-2017, 10:17 PM

Quote:

Originally Posted by Simple

DiagBox from version 7.66/8.02 to 8.44 has 4.3.4, but users have used other versions successfully.

Thanks Simple, you Maitresox et Scary we are the best !!!!

djslowrnb · 09-27-2017, 09:15 PM

Quote:

Originally Posted by Simple

DiagBox from version 7.66/8.02 to 8.44 has 4.3.4, but users have used other versions successfully.

Thanks you is the best!!!

djslowrnb · 10-01-2017, 08:20 PM

Quote:

Originally Posted by Simple

DiagBox from version 7.66/8.02 to 8.44 has 4.3.4, but users have used other versions successfully.

Hello simple

I have problem to dialog with my car 308 year 2008
VCI sporadig not read VIN and not read units
I test with many version firmware and result is the same my vci is not good?
But with old 6.16 i not have this problem...
Nlc have flash my unit in 2014

Simple · 10-01-2017, 08:28 PM

Was the VCI working with the same 308? Try using your VCI with another Peugeot or Citroen car and see if it detects it. Is the Windows Driver installing and working OK?

Some VCI's have a problem with C5 and 207/208. More experienced forum members may be able to help!!

djslowrnb · 10-02-2017, 12:07 AM

thanks for response Simple!!
I have problem when i read vin, the read fonction at random the diagnostic is not good....
i see the message connect vci....
I try to update other firmware and one time i see peripheric is not reconize but now its ok i daed my VCI?probably?

regards !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OPCOM Firmware 1.70	djrusskof	Opcom, Tech2	21	02-19-2019 04:36 PM
appli smarthphone pour decoder poste renault	diagologie	Autoradio et Navigateur GPS	4	09-04-2016 03:30 PM
recherche firmware aPPLI 4.3.3 et 4.3.4	jasmin	LEXIA, PP2000, DiagBox	15	05-07-2015 09:25 AM
Update diagbox 7.40 et firmware 4.3.2	CED300482	LEXIA, PP2000, DiagBox	8	04-23-2014 09:57 PM
demande d'appli	antvan	Probleme des membres	1	01-13-2014 10:02 AM

07-24-2017, 03:45 PM	#2
Simple Membre attaché Join Date: Aug 2014 Location: NA Posts: 279 Thanks: 5 Thanked 415 Times in 80 Posts Rep Power: 21	The are 2 ways of up**** XS Evolution VCI Firmware, 1- Automatic up**, Follow instructions in this link: http://www.tlemcen-electronic.com/fo...560#post540560 2- Manual up****, download and install "PSA Interface Checker Install.exe", a- Ensure XS Evolution VCI is connected and recognised b- Click on Activate, greyed buttons will become active c- Click Version to check current version d- Click Select file to choose the Firmware file desired for upgrade e- Click Downloading to start the flashing process. Please wait 5 seconds after the flashing process finished and before disconnecting or starting other application, to ensure no flashing corruption.

09-26-2017, 12:06 PM	#3
djslowrnb Débutant T-E Join Date: Sep 2014 Location: Lyon Posts: 88 Thanks: 87 Thanked 26 Times in 20 Posts Rep Power: 11	Thanks simple i use version 7.83 how to know the good firmware fot this version depend car to dagnostic? thanks!!!

09-26-2017, 09:53 PM	#4
Simple Membre attaché Join Date: Aug 2014 Location: NA Posts: 279 Thanks: 5 Thanked 415 Times in 80 Posts Rep Power: 21	DiagBox from version 7.66/8.02 to 8.44 has 4.3.4, but users have used other versions successfully.

10-01-2017, 08:28 PM	#8
Simple Membre attaché Join Date: Aug 2014 Location: NA Posts: 279 Thanks: 5 Thanked 415 Times in 80 Posts Rep Power: 21	Was the VCI working with the same 308? Try using your VCI with another Peugeot or Citroen car and see if it detects it. Is the Windows Driver installing and working OK? Some VCI's have a problem with C5 and 207/208. More experienced forum members may be able to help!!

10-02-2017, 12:07 AM	#9
djslowrnb Débutant T-E Join Date: Sep 2014 Location: Lyon Posts: 88 Thanks: 87 Thanked 26 Times in 20 Posts Rep Power: 11	thanks for response Simple!! I have problem when i read vin, the read fonction at random the diagnostic is not good.... i see the message connect vci.... I try to update other firmware and one time i see peripheric is not reconize but now its ok i daed my VCI?probably? regards !!