si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

biohead · 26/04/2014, 20h41

Have any members on here had issues when installing Diagbox on Windows 7?

I'm using 32-bit, Pro version - in a Virtual Machine on my Mac (VMWare Fusion 6). When it gets to the initial activation, it fails with a status code of 0. I've got the language set to US, I've tried with the network adaptor enabled and disabled, and also with and without UAC working.

If I do exactly the same process using Windows XP, it's works as it should.

I've been using XP + Lexia 46 for some years now, and would like this opportunity to upgrade both the OS and software.

Geri · 27/04/2014, 07h37

No problems with install Diagbox on Win7 en 32bit. I have also installed Diagbox on pc with Win8.1 en 32 bit. OS must be 32 bit.

biohead · 27/04/2014, 12h28

I'm using 32-bit Windows 7. Its strange that it works fine with XP, but activation issues with Windows 7. I'm going to try creating a Virtual Machine using a different software first, and then import it into VMWare. I've seen a few posts on the internet that VMWare has caused issues in the past.

biohead · 29/04/2014, 17h25

As mentioned, it worked fine in Virtual Box. I've tried subsequently importing into VMWare but then Diagbox needs reactivating.

I'll just have to get used to using Virtual Box I guess!

Iggie · 16/05/2014, 21h38

Citation:

Envoyé par biohead

As mentioned, it worked fine in Virtual Box. I've tried subsequently importing into VMWare but then Diagbox needs reactivating.

I'll just have to get used to using Virtual Box I guess!

I have installed MD and Diagbox many times on VMware 8/9 without problem.

biohead · 17/05/2014, 10h20

I wonder if VMWare Fusion is a bit different then? It's the latest VMWare fusion 6 running on OS X.

adv · 19/05/2014, 09h23

Hey guys, same issue there ! No way to enable DB 7 in a virtual machine with Win7 and VMplayer (even in an XP VM if my memory is good) !

I tried many things arround network NAT, firewall, internet connection sharing, UAC, NO WAY !!!

You're not alone guys ^^

I'll try with VirtualBox !

przygodap · 24/05/2014, 05h37

It is not the problem with vmware VM, but with controler on which boot HDD is insatled. it must be IDE no SCSI, which vmware choose by default (as can not be changed to IDE other way than editing wmx file). As with SCSI you get activation error = 0.

lurchy666 · 04/06/2014, 13h53

burn the iso to a disc as it has to be installed from a physical disc, i had this problem untill i figured that out, the updates can be done from hard drive but the 1st install has to be done from a disc

BackONct · 24/06/2014, 10h25

the problem can be that the diagbox installer detects the virtual machine and doesnt install?. Try This

Edit the VM Settings and add this

Citation:

isolation.tools.getPtrLocation.disable = "TRUE"
isolation.tools.setPtrLocation.disable = "TRUE"
isolation.tools.setVersion.disable = "TRUE"
isolation.tools.getVersion.disable = "TRUE"
monitor_control.disable_directexec = "TRUE"
monitor_control.disable_chksimd = "TRUE"
monitor_control.disable_ntreloc = "TRUE"
monitor_control.disable_selfmod = "TRUE"
monitor_control.disable_reloc = "TRUE"
monitor_control.disable_btinout = "TRUE"
monitor_control.disable_btmemspace = "TRUE"
monitor_control.disable_btpriv = "TRUE"
monitor_control.disable_btseg = "TRUE"

kowalma · 30/07/2014, 05h52

From my expirience it will be enought to add 1mb IDE drive to VMware virtual machine to make sure that activation code is different than 0

piranha-- · 17/10/2015, 08h49

i've used 7.65 on windows 10.
no issues till 16/10. now looking for update

bugmenot111 · 17/10/2015, 12h02

Hello i have just one question? Why are you bothering with Windows 10?

26/04/2014, 20h41	#1
biohead Membre Non Confirmé Date d'inscription: avril 2014 Localisation: London Messages: 6 Thanks: 3 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	Diagbox Windows 7 Install Have any members on here had issues when installing Diagbox on Windows 7? I'm using 32-bit, Pro version - in a Virtual Machine on my Mac (VMWare Fusion 6). When it gets to the initial activation, it fails with a status code of 0. I've got the language set to US, I've tried with the network adaptor enabled and disabled, and also with and without UAC working. If I do exactly the same process using Windows XP, it's works as it should. I've been using XP + Lexia 46 for some years now, and would like this opportunity to upgrade both the OS and software.

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
diagbox et windows 8.1	tonio5766	LEXIA, PP2000, DiagBox	2	14/04/2014 19h08
diagbox windows 7 32b sur netbook	alexio	LEXIA, PP2000, DiagBox	0	24/02/2014 20h17
tout les drivers windows pour diagbox	deedee	LEXIA, PP2000, DiagBox	10	31/07/2013 12h36

27/04/2014, 07h37	#2
Geri Membre attaché Date d'inscription: novembre 2012 Localisation: Flandre / Belgique Messages: 327 Thanks: 555 Thanked 157 Times in 87 Posts Pouvoir de réputation: 15	No problems with install Diagbox on Win7 en 32bit. I have also installed Diagbox on pc with Win8.1 en 32 bit. OS must be 32 bit.

27/04/2014, 12h28	#3
biohead Membre Non Confirmé Date d'inscription: avril 2014 Localisation: London Messages: 6 Thanks: 3 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	I'm using 32-bit Windows 7. Its strange that it works fine with XP, but activation issues with Windows 7. I'm going to try creating a Virtual Machine using a different software first, and then import it into VMWare. I've seen a few posts on the internet that VMWare has caused issues in the past.

29/04/2014, 17h25	#4
biohead Membre Non Confirmé Date d'inscription: avril 2014 Localisation: London Messages: 6 Thanks: 3 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	As mentioned, it worked fine in Virtual Box. I've tried subsequently importing into VMWare but then Diagbox needs reactivating. I'll just have to get used to using Virtual Box I guess!

17/05/2014, 10h20	#6
biohead Membre Non Confirmé Date d'inscription: avril 2014 Localisation: London Messages: 6 Thanks: 3 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	I wonder if VMWare Fusion is a bit different then? It's the latest VMWare fusion 6 running on OS X.

19/05/2014, 09h23	#7
adv Tuto Maker Date d'inscription: juin 2011 Localisation: France, Lyon, Bourg en Bresse Messages: 170 Thanks: 68 Thanked 592 Times in 65 Posts Pouvoir de réputation: 21	Hey guys, same issue there ! No way to enable DB 7 in a virtual machine with Win7 and VMplayer (even in an XP VM if my memory is good) ! I tried many things arround network NAT, firewall, internet connection sharing, UAC, NO WAY !!! You're not alone guys ^^ I'll try with VirtualBox !

24/05/2014, 05h37	#8
przygodap Membre Non Confirmé Date d'inscription: mai 2014 Localisation: Poland Messages: 3 Thanks: 0 Thanked 1 Time in 1 Post Pouvoir de réputation: 0	It is not the problem with vmware VM, but with controler on which boot HDD is insatled. it must be IDE no SCSI, which vmware choose by default (as can not be changed to IDE other way than editing wmx file). As with SCSI you get activation error = 0.

04/06/2014, 13h53	#9
lurchy666 Membre Non Confirmé Date d'inscription: mars 2014 Localisation: wisbech cambs Messages: 2 Thanks: 1 Thanked 1 Time in 1 Post Pouvoir de réputation: 0	burn the iso to a disc as it has to be installed from a physical disc, i had this problem untill i figured that out, the updates can be done from hard drive but the 1st install has to be done from a disc

30/07/2014, 05h52	#11
kowalma Membre Non Confirmé Date d'inscription: juillet 2014 Localisation: Poland, Wroclaw Messages: 5 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	From my expirience it will be enought to add 1mb IDE drive to VMware virtual machine to make sure that activation code is different than 0

17/10/2015, 08h49	#12
piranha-- Membre Non Confirmé Date d'inscription: octobre 2015 Localisation: Lija, Malta Messages: 3 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	i've used 7.65 on windows 10. no issues till 16/10. now looking for update

17/10/2015, 12h02	#13
bugmenot111 Membre trés attaché Date d'inscription: juin 2015 Localisation: Canada Messages: 491 Thanks: 89 Thanked 542 Times in 231 Posts Pouvoir de réputation: 29	Hello i have just one question? Why are you bothering with Windows 10?