Delphi el5 bsi

z8083 · 02/09/2022, 17h18

Hello everyone i will need your help .
I have an Opel grandland x that bsi has a problem with a interior ground point if I use an external ground everything works perfectly. I was think replacing bsi with a used one but my concern is will it work ?
From what i read over net is that i must virgin used bsi and then program it but will pin code been written on bsi from server ?

Fastdiag · 02/09/2022, 17h58

Hi

I think its better for you to keep the external ground.

This bsi is the most difficult i know and i dont think you can clone it easily.

You can loose all data of your original bsi.

Best regards

Envoyé de mon LYA-L29 en utilisant Tapatalk

boris93600 · 02/09/2022, 18h07

Hi,

I can see in your profile you are an engineer.
Why don't you put a jump wire to a confirmed GND into the BSI (5 minute work) ?

z8083 · 02/09/2022, 18h46

Citation:

Envoyé par boris93600

Hi,

I can see in your profile you are an engineer.
Why don't you put a jump wire to a confirmed GND into the BSI (5 minute work) ?

I have already done that and everything working but I’m asking if in the future bsi failed what my options are because im new on psa style cars Im used on gm staff that are much easier. Thanks .

---------- Post added at 16h46 ---------- Previous post was at 16h37 ----------

Citation:

Envoyé par Fastdiag

Hi

I think its better for you to keep the external ground.

This bsi is the most difficult i know and i dont think you can clone it easily.

You can loose all data of your original bsi.

Best regards

Envoyé de mon LYA-L29 en utilisant Tapatalk

I know this bsi is complicated and i don’t want to clone it , i wanted to virgin used one and coded online . I have seen a shop offering virgin bsi ready to code so i assume that they virgin only the eeprom .

fils · 02/09/2022, 19h59

Hi,

Car with a EL5 cost lot of money...
Set new bsi if you want online coding.

UdsCanOnline.com · 17/09/2022, 22h07

Hello z8083
If you have a friend with the udscanonline software I can help you (need uco + a second-hand bsi) need the same model of bsi (because even if it looks like it is not compatible) you need bsi from Opel grandland x. we will do 100% of the operation by the OBD

02/09/2022, 17h18	#1
z8083 Membre Non Confirmé Date d'inscription: septembre 2022 Localisation: Ελλάδα Âge: 41 Messages: 5 Thanks: 4 Thanked 1 Time in 1 Post Pouvoir de réputation: 0	Delphi el5 bsi Hello everyone i will need your help . I have an Opel grandland x that bsi has a problem with a interior ground point if I use an external ground everything works perfectly. I was think replacing bsi with a used one but my concern is will it work ? From what i read over net is that i must virgin used bsi and then program it but will pin code been written on bsi from server ?

02/09/2022, 17h58	#2
Fastdiag Membre accro Date d'inscription: octobre 2021 Localisation: France, Paris Âge: 41 Messages: 1 128 Thanks: 3 834 Thanked 2 107 Times in 938 Posts Pouvoir de réputation: 27	Hi I think its better for you to keep the external ground. This bsi is the most difficult i know and i dont think you can clone it easily. You can loose all data of your original bsi. Best regards Envoyé de mon LYA-L29 en utilisant Tapatalk __________________ Il ne faut pas perdre son temps à avancer des arguments de bonne foi face à des gens de mauvaise foi

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
Delphi ds100E ou Delphi ds150E	FoxAE86	Autocom, Delphi, Actia, Bosch, SPC, BrainBee, Autel	0	21/04/2022 17h13
VCI Delphi avec Delphi 2017	jeager13	Systeme d'exploitation	3	19/12/2021 19h53
Le delphi 150	yvence ngouffo	Abritus72	8	04/11/2020 15h54
delphi	thierry du58	Autocom, Delphi, Actia, Bosch, SPC, BrainBee, Autel	4	26/10/2015 00h39
VDS CDP+ DELPHI clone pour Autocom ou Delphi 2-13-3	maitresox	Vente, Achat, Echange	1	28/12/2013 17h26

02/09/2022, 18h07	#3
boris93600 T-E master Date d'inscription: mars 2017 Localisation: france paris Âge: 44 Messages: 2 234 Thanks: 3 387 Thanked 3 906 Times in 1 927 Posts Pouvoir de réputation: 50	Hi, I can see in your profile you are an engineer. Why don't you put a jump wire to a confirmed GND into the BSI (5 minute work) ?

02/09/2022, 19h59	#5
fils Patron de Garage Date d'inscription: décembre 2011 Localisation: idf Messages: 5 566 Thanks: 2 933 Thanked 8 530 Times in 4 166 Posts Pouvoir de réputation: 105	Hi, Car with a EL5 cost lot of money... Set new bsi if you want online coding.

17/09/2022, 22h07	#6
UdsCanOnline.com Débutant Date d'inscription: juillet 2019 Localisation: riga, Lettonie / latvija Messages: 6 Thanks: 11 Thanked 57 Times in 12 Posts Pouvoir de réputation: 0	Hello z8083 If you have a friend with the udscanonline software I can help you (need uco + a second-hand bsi) need the same model of bsi (because even if it looks like it is not compatible) you need bsi from Opel grandland x. we will do 100% of the operation by the OBD