si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

Nizar-maoukil · 08/06/2014, 21h33

salut
winols peut recalculer le checksum
les outile de flashage paut aussi recalculer les cheksums pendant l'ecriture comme fgtech kesse
dans le cas ou le chek et NOK il faut le recalculer
regards

rahmani2008 · 08/06/2014, 22h11

Citation:

Envoyé par Nizar-maoukil

salut
winols peut recalculer le checksum
les outile de flashage paut aussi recalculer les cheksums pendant l'ecriture comme fgtech kesse
dans le cas ou le chek et NOK il faut le recalculer
regards

salut et merci pour la reponse
"
dans le cas ou le chek et NOK il faut le recalculer " d'accord mais comment???.

Nizar-maoukil · 09/06/2014, 01h04

salur rahmani
voici comment coriger le checksum avec winols
Correcting checksums is very easy because this is often done by additional plug-ins. These must be purchased separately but for this they also do all the work needed automatically.

Start the checksum dialog with the menu item "Edit" / "Checksum" (Hotkey F2). Click on "Search". If you own the right checksum module, it will automatically be applied and the checksum will be calculated and (if you want that) always be corrected.

If you do not have the matching module, you can let EVC check your project for free and without any commitments. Click on "Search checksum online". The project will be compressed and uploaded to the EVC server (Internet connection required). A few seconds later you will receive an answer, telling you which checksum module will work for your data.

Important: Some checksum modules require an unmodified original version. That means, that you must have loaded the original data from the car as original version into the WinOLS project. Otherwise it may happen that the checksum is not recognized or not calculated correctly.

best regards

08/06/2014, 21h33	#16
Nizar-maoukil Membre trés attaché Date d'inscription: juillet 2013 Localisation: Maroc,tetouan Âge: 37 Messages: 647 Thanks: 845 Thanked 792 Times in 331 Posts Pouvoir de réputation: 21	salut winols peut recalculer le checksum les outile de flashage paut aussi recalculer les cheksums pendant l'ecriture comme fgtech kesse dans le cas ou le chek et NOK il faut le recalculer regards __________________ Mercedes esl repair programing and renew bmw E90 and E60 esl off ( car runs without esl ) regards

09/06/2014, 01h04	#18
Nizar-maoukil Membre trés attaché Date d'inscription: juillet 2013 Localisation: Maroc,tetouan Âge: 37 Messages: 647 Thanks: 845 Thanked 792 Times in 331 Posts Pouvoir de réputation: 21	salur rahmani voici comment coriger le checksum avec winols Correcting checksums is very easy because this is often done by additional plug-ins. These must be purchased separately but for this they also do all the work needed automatically. Start the checksum dialog with the menu item "Edit" / "Checksum" (Hotkey F2). Click on "Search". If you own the right checksum module, it will automatically be applied and the checksum will be calculated and (if you want that) always be corrected. If you do not have the matching module, you can let EVC check your project for free and without any commitments. Click on "Search checksum online". The project will be compressed and uploaded to the EVC server (Internet connection required). A few seconds later you will receive an answer, telling you which checksum module will work for your data. Important: Some checksum modules require an unmodified original version. That means, that you must have loaded the original data from the car as original version into the WinOLS project. Otherwise it may happen that the checksum is not recognized or not calculated correctly. best regards __________________ Mercedes esl repair programing and renew bmw E90 and E60 esl off ( car runs without esl ) regards

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
demande explication boot mode	tony2552	Pinout calculateurs et bootmode	7	10/01/2014 08h27
video d'explication fap	prodlt	Tutoriels	0	24/12/2013 23h54
explication esi tronic 2013Q2	ucforstill	Autocom, Delphi, Actia, Bosch, SPC, BrainBee, Autel	6	29/11/2013 11h24
Winols explication suite	selouan	Chiptuning	11	22/09/2013 15h45
winols explication	selouan	Chiptuning	2	21/05/2013 10h35